optoway sps-9110v-1rg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 1 sps-9110v-1rg (rohs compliant) 1260 to 1620 nm / 3 gb/s single optical sm receiver ********************************************************************************************************************************************************************** features l smpte 297-2006 compliant l speed from 50 mbps to 3gbps l support video pathological patterns for sd-sdi, hd-sdi and 3g-sdi l single receiver with simplex lc l based on industry standard sfp l single +3.3 v power supply l rohs-6 compliant l 0 to 70 o c operation l hot pluggable applications l smpte 297-2006 compliant electrical-to-optical interfaces l high-density video routers description the sps-9110v-1rg is a single channel optical single mode receiver module designed to receive optical serial digital signals as defined in smpte 297-2006. it supports from 50 mbps to 3 gbps and is specifically designed for received the smpte 259m, smpte 344m, smpte 292m and smpte 424m sdi pathological patterns. it is with the sfp 20-pin connector to allow hot plug capability. order information rx1 rx2 p/no. type bit rate (mb/s) (nm) sen. (dbm) (nm) sen. (dbm) package temp ( o c) rohs compliant sps-9110v-1rg 1-rx 50 to 3000 1260/1620 0 to -20 lc sfp 0 to 70 yes
optoway sps-9110v-1rg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 2 absolute maximum ratings exposure to absolute maximum rating conditions for extended periods may affect device reliability. absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating case temperature tc -20 85 o c power supply voltage vcc 0 4 v esd tolerance on all pins 1 kv hbm relative humidity --- 5 95 % rh non-condensing recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating case temperature tc 0 70 o c baud rate 50 3000 mb/s power supply current icc 120 160 ma receiver specifications (0 o c < tc < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical wavelength of operation 1260 --- 1620 nm 0 --- -18 dbm pathological sensitivity for smpte 424m 2.97 gb/s sen 0 -20 dbm prbs 2 23 -1, ber=1e-12 0 --- -20 dbm pathological sensitivity for smpte 292m 1.485 gb/s sen 0 -21 dbm prbs 2 23 -1, ber=1e-12 signal detect -- asserted pa --- --- -20 dbm transition: low to high signal detect -- deasserted pd -29 --- --- dbm transition: high to low signal detect -- hysteresis 1 6 db optical return loss -27 db electrical cml output (differential) 550 660 850 mvp-p ac coupled output 135 ps 1, smpte 424m 270 ps 1, smpte 292m 800 ps 1, smpte 344m optical rise time / fall time tr / tf 1.5 ns 1, smpte 259m output los voltage -- low v ol 0 0.5 v i ol =-1.6ma, 1 ttl unit load output los voltage -- high v oh 2.5 vcc+0.3 v i oh =40 m a, 1 ttl unit load v oh 2.5 vcc+0.3 v scl, sda v ol 0 0.5 v 1. 20% to 80%, unfiltered. module definition module definition pin 5 pin 6 interpretation by host 4 scl sda serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, scl and sda appear as no connector (nc). when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway sps-9110v-1rg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 3 connection diagram pin name function notes 1 vee signal ground 2 nc no connection 3 nc no connection 4 vee signal ground 5 scl serial i 2 c clock 6 sda serial i 2 c data 7 vee signal ground 8 nc no connection 9 nc no connection 10 nc no connection 11 vee signal ground 12 rx- negative differential output 13 rx+ positive differential output 14 vee signal ground 15 vcc rx power supply +3.3v 5% 16 nc no connection 17 vee signal ground 18 nc no connection 19 nc no connection 20 nc no connection
optoway sps-9110v-1rg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 4 recommended circuit schematic vee 100 differential rx - rx + nc vcc_rx nc nc nc nc 20 18 19 16 15 8 9 17 vcc 3.3v 10 nc scl sda 4.7k 5 6 nc nc nc vee vee vee vee vee 14 2 4 1 12 3 11 7 13 100nf 10uf 1uh 100nf 10uf 4.7k rd - rd + re-clocker i2c data i2c clk vcc 3.3v 1. consult chipset manufacturer s data sheet and application data for appropriate receiver input biasing network. package diagram ( units in mm) note: since the sps-9110vw-1rg is single channel device, the receptacle for channel 2 is not used.
optoway sps-9110v-1rg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2008 v1.0 5 revision history version subject release date 1.0 initial datasheet 2008/10/1
|
